MCP14E6-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.12W |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MCP14E6 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 2A |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 1.12W |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.035 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E6-E/P Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is indicated.The device is mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.This device allows temperatures in the range of -40°C~150°C TJ.Inverting is used as its input type.Its configuration starts with 8 terminations.There are various related parts under its base part number MCP14E6.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 12V.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.There are several useful electronic components within its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Based on its basis, it integrates 2 outputs.This device supports a current output of 2A at the output.The maximum power dissipation of 1.12W shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 1.8mA to ensure higher stability.The voltage it outputs is 18V.
MCP14E6-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
MCP14E6-E/P Applications
There are a lot of Microchip Technology MCP14E6-E/P gate drivers applications.
- DC-DC Converters
- Industrial motor drives - compact, standard, premium, servo drives
- Active filtering
- Motor Drives
- A/D drivers
- 3-Phase Motor Inverter Driver
- Isolated Supplies for Motor Control
- Multicolor LED/laser displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for controller area network (CAN),
