MCP14E6-E/SN
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E6 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
MCP14E6-E/SN Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is package in Tube case.It's mounted on the way to Surface Mount.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.This device allows temperatures in the range of -40°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MCP14E6.During design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.2A is the maximum output current.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.There are 2 outputs integrated for its basis.This device is capable of delivering 2A current.Using 699mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 1.8mA.
MCP14E6-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 699mW
MCP14E6-E/SN Applications
There are a lot of Microchip Technology MCP14E6-E/SN gate drivers applications.
- General Purpose 3-Phase Inverter
- Video amplifiers
- Motor Control
- 3-Phase Motor Inverter Driver
- Welding
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High current laser/LED systems
- High frequency line drivers
- Telecom switch mode power supplies
- High-voltage isolated DC-DC converters
