MCP14E6T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 669mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E6 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E6T-E/SN Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.This device is equipped with 2 drivers for its configuration.Gate drivers is mounted in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number MCP14E6.Devices have 8 pins available.In order to operate, a voltage of 12V has to be applied.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.As a maximum, there is 2A limit to the output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There are 8 component pins on the board.Its maximum power dissipation of 669mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 1.8mA.
MCP14E6T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 669mW
MCP14E6T-E/SN Applications
There are a lot of Microchip Technology MCP14E6T-E/SN gate drivers applications.
- Video amplifiers
- High frequency line drivers
- High current laser/LED systems
- Industrial Power Supplies
- Solar power supplies
- DC-DC Converters
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- PCMCIA applications
- Head-up and Head mounted displays
