MCP14E7-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.12W |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MCP14E7 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.12W |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.035 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E7-E/P Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.Gate drivers is package in Tube case.Its recommended mounting way is Through Hole.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP14E7.At the time of design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver utilizes the interface IC HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.The component has 8 pins.The basis of this model has 2 outputs integrated.An output current of 2A is supported.Based on the maximum power dissipation of 1.12W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To ensure high stability, the supply current should be kept at 1.8mA.Mosfet gate drivers produces a voltage of 18V.
MCP14E7-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
MCP14E7-E/P Applications
There are a lot of Microchip Technology MCP14E7-E/P gate drivers applications.
- Motor Drives
- Isolated Supplies for Motor Control
- DC-DC Converters
- RGB applications
- General Purpose 3-Phase Inverter
- Commercial and agricultural vehicles (CAV)
- Industrial motor drives - compact, standard, premium, servo drives
- Broadcast equipment
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable computers
