MCP14E7-E/SN
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E7 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 2A |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.035 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MCP14E7-E/SN Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A package of Tube has been used.Its recommended mounting way is Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.Under its base part number MCP14E7, various related parts can be found.During design, it is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.There are several useful electronic components within its subcategory MOSFET Drivers.A board with 8 component pins is available.There are 2 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 2A.The maximum power dissipation of 699mW shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 1.8mA.In this case, it outputs 18V voltage.
MCP14E7-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 699mW
MCP14E7-E/SN Applications
There are a lot of Microchip Technology MCP14E7-E/SN gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-voltage isolated DC-DC converters
- Industrial Power Supplies
- High current laser/LED systems
- High frequency line drivers
- Automotive Applications
- Portable Navigation Devices
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
- White Goods - Air Conditioner, Washing Machine,
