MCP14E7T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E7 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E7T-E/MF Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.A packaging method of Tape & Reel (TR) is used.This configuration includes 2 drivers.Surface Mount is mounted in the way.A supply voltage of 4.5V~18V demonstrates its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.The configuration starts with 8 terminations.There are various parts that can be found under its base part number MCP14E7.A supply voltage of 12V is required for operation.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 2A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board contains 8 pins for component connections.The output current can be set to 2A.As a precaution, make sure the supply current is kept at 1.8mA.Using its power supply of 4.5/18V, it provides solutions to diverse power supply problems.
MCP14E7T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
MCP14E7T-E/MF Applications
There are a lot of Microchip Technology MCP14E7T-E/MF gate drivers applications.
- 3-Phase Motor Inverter Driver
- Commercial air-conditioning (CAC)
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Line drivers
- Uninterruptible Power Supplies (UPS)
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Gate Driver Supplies
- Isolated Supplies for Motor Control
