MCP14E7T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E7 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E7T-E/SN Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A package of Tape & Reel (TR) has been used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Non-Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.There are various parts that can be found under its base part number MCP14E7.In addition, it is specifically designed to operate with a supply voltage of 12V.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.The maximum output current can amount to 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 8 component pins.An output current of 2A is supported.Considering its maximum power dissipation, 699mW shows its maximum capacity to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 1.8mA.With its power supplies of 4.5/18V, it solves the problems of power supply for a variety of applications.
MCP14E7T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 699mW
MCP14E7T-E/SN Applications
There are a lot of Microchip Technology MCP14E7T-E/SN gate drivers applications.
- Solar power supplies
- Dual-Battery Systems
- White Goods - Air Conditioner, Washing Machine,
- LCD/LCoS/DLP portable and embedded pico projectors
- 3-Phase Motor Inverter Driver
- Portable computers
- Commercial air-conditioning (CAC)
- High current laser/LED systems
- Multicolor LED/laser displays
- Industrial Motor Inverter - Power Tools, Robotics
