MCP14E8-E/MF
| Parameters | |
|---|---|
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E8 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
MCP14E8-E/MF Overview
Its 8-VDFN Exposed Pad package is adopted for higher flexibility.Tube represents the packaging method.Configuration is based on 2 drivers.Surface Mount is the way in which it is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.The base part number MCP14E8 refers to a number of related parts.Devices have 8 pins available.With a supply voltage of 12V, it is designed to operate.The interface IC of the device is HALF BRIDGE BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Mosfet driver supports an output current of 2A.As a precaution, make sure the supply current is kept at 1.8mA.
MCP14E8-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E8-E/MF Applications
There are a lot of Microchip Technology MCP14E8-E/MF gate drivers applications.
- Topologies
- Motor Drives
- High-speed communications
- Portable Media Players
- Refrigerator
- Broadcast equipment
- Motor controllers
- Automotive Applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Power factor correction (PFC) circuits
