banner_page

MCP14E8-E/P

Through Hole Tube Active EAR99 Gate Drivers ICs Inverting, Non-Inverting 8-DIP (0.300, 7.62mm) MCP14E8 Low-Side


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP14E8-E/P
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 152
  • Description: Through Hole Tube Active EAR99 Gate Drivers ICs Inverting, Non-Inverting 8-DIP (0.300, 7.62mm) MCP14E8 Low-Side (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2011
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory MOSFET Drivers
Max Power Dissipation 1.12W
Voltage - Supply 4.5V~18V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 12V
Base Part Number MCP14E8
Pin Count 8
Number of Outputs 2
Output Voltage 18V
Max Output Current 2A
Nominal Supply Current 1.8mA
Power Dissipation 1.12W
Output Current 2A
Max Supply Current 1.8mA
Propagation Delay 65 ns
Input Type Inverting, Non-Inverting
Turn On Delay Time 65 ns
Rise Time 30ns
Fall Time (Typ) 35 ns
Rise / Fall Time (Typ) 12ns 15ns
Interface IC Type HALF BRIDGE BASED MOSFET DRIVER
Channel Type Independent
Input Bias Current 10μA
Turn On Time 0.035 μs
Input Current 1μA
Output Peak Current Limit-Nom 2A
Driven Configuration Low-Side
Gate Type IGBT, N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 2A 2A
High Side Driver YES
Logic Voltage - VIL, VIH 0.8V 2.4V
Turn Off Time 0.04 μs
Height 4.95mm
Length 10.16mm
Width 7.11mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP14E8-E/P Overview


A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.The packaging method is indicated by Tube.Its recommended mounting way is Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting, Non-Inverting is the input type used in this program.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MCP14E8.When the device is designed, it has 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.The maximum output current can amount to 2A.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.The basis has 2 integrated outputs.The device is capable of delivering a current of 2A.Using 1.12W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 1.8mA.In this case, the voltage output is 18V.

MCP14E8-E/P Features


Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W

MCP14E8-E/P Applications


There are a lot of Microchip Technology MCP14E8-E/P gate drivers applications.

  • Refrigerator
  • Active filtering
  • Isolated Gate Driver Supplies
  • Isolated Supplies for controller area network (CAN),
  • Industrial Motor Inverter - Power Tools, Robotics
  • Motor Controls
  • General Purpose 3-Phase Inverter
  • Commercial air-conditioning (CAC)
  • AC-DC Inverters
  • Industrial Modules

Write a review

Note: HTML is not translated!
    Bad           Good