MCP14E8T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E8 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E8T-E/MF Overview
The 8-VDFN Exposed Pad package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).2 drivers are incorporated for its configuration.Surface Mount is mounted in the way.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.It's configured with 8 terminations.There are various parts that can be found under its base part number MCP14E8.This device operates with 12V supply voltage.In this case, HALF BRIDGE BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be limited to 2A.There are several useful electronic components found in its subcategory of MOSFET Drivers.8 pins are present on the component.An output current of 2A is supported.For higher stability, the supply current should be kept at 1.8mA.Due to its power supplies of 4.5/18V, it solves the power supply problem for a wide range of applications.
MCP14E8T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
MCP14E8T-E/MF Applications
There are a lot of Microchip Technology MCP14E8T-E/MF gate drivers applications.
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for controller area network (CAN),
- Commercial air-conditioning (CAC)
- High power buffers
- Broadcast equipment
- AC-DC Inverters
- A/D drivers
- DC-DC Converters
