MCP14E9-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E9 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 14ns 17ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E9-E/MF Overview
Its 8-VDFN Exposed Pad package provides greater flexibility.Tube represents the packaging method.For its configuration, it incorporates 2 drivers.There is a mounting bracket in the way of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.For this device, the temperature range is -40°C~150°C TJ.The input type is Inverting.As a result of its configuration, it contains a maximum of 8 terminations.The base part number MCP14E9 refers to a number of related parts.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 12V.HALF BRIDGE BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 3A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.8 pins are present on the component.The output current supported by the device is 3A.If you want a stable supply current, you should keep it at 1.8mA.
MCP14E9-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E9-E/MF Applications
There are a lot of Microchip Technology MCP14E9-E/MF gate drivers applications.
- 3-Phase Motor Inverter Driver
- Dual-Battery Systems
- High frequency line drivers
- Isolated Supplies for Motor Control
- serial peripheral interface (SPI), I2C
- Solar inverters
- High power buffers
- Uninterruptible Power Supplies (UPS)
- Industrial motor drives - compact, standard, premium, servo drives
- DC-DC Converters
