MCP14E9-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.12W |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MCP14E9 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 1.12W |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 14ns 17ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E9-E/P Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.There are 2 drivers installed for this device.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting is the input type used in this program.It's configured with 8 terminations.The base part number MCP14E9 refers to a number of related parts.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.An output current as high as 3A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.The device is capable of delivering a current of 3A.This device has a maximum power dissipation of 1.12W, indicating that it is capable of reducing power loss without overheating.The supply current should be kept at 1.8mA to ensure higher stability.Mosfet gate drivers produces a voltage of 18V.
MCP14E9-E/P Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
MCP14E9-E/P Applications
There are a lot of Microchip Technology MCP14E9-E/P gate drivers applications.
- Isolated Gate Driver Supplies
- Solar inverters
- Motor Controls
- PCMCIA applications
- Head-up and Head mounted displays
- Portable computers
- Portable Navigation Devices
- High power buffers
- Industrial Motor Inverter - Power Tools, Robotics
- Welding
