MCP14E9T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E9 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 14ns 17ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E9T-E/MF Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.There is a package in the form of Tape & Reel (TR).The configuration is supported by 2 drivers.It's mounted on the way to Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~150°C TJ.Inverting is used as its input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Under its base part number MCP14E9, various related parts can be found.In order to operate, a voltage of 12V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.There is an output current limit of 3A for this device.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has 8 component pins.This device supports a current output of 3A at the output.In order to ensure greater stability, it is recommended to keep the supply current at 1.8mA.Based on its power supplies of 4.5/18V, it solves the problem of power supply failure for a variety of applications.
MCP14E9T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
MCP14E9T-E/MF Applications
There are a lot of Microchip Technology MCP14E9T-E/MF gate drivers applications.
- High frequency line drivers
- Video amplifiers
- Power factor correction (PFC) circuits
- AC-DC Inverters
- General Purpose 3-Phase Inverter
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- Portable Media Players
- Pulse transformer drivers
- Line drivers
