MCP14E9T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E9 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 14ns 17ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E9T-E/SN Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.Mosfet driver is based on 8 terminations.Numerous related parts are available for its base part number MCP14E9.The device is specifically designed to operate at 12V volts.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 3A limit to the output current.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 8 component pins.This device supports a current output of 3A at the output.Based on its maximum power dissipation of 699mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.8mA to ensure greater stabilMosfet gate driversy.Due to its 4.5/18V power supply, it can solve power supply problems for an array of diverse applications.
MCP14E9T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 699mW
MCP14E9T-E/SN Applications
There are a lot of Microchip Technology MCP14E9T-E/SN gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Video amplifiers
- Motor Control
- Motor controllers
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Portable Media Players
- Portable computers
- serial peripheral interface (SPI), I2C
- Isolated Gate Driver Supplies
