MCP1602T-150I/MF
| Parameters | |
|---|---|
| Output Type | Fixed |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1602 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
MCP1602T-150I/MF Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 8 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 8-VDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on this voltage regulator 12v. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator of this type operates at a switching frequency of 2MHz. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. This voltage regulator 12v features maximum design flexibility thanks to its 500mA output current. Voltage regulator has a maximum input voltage of 5.5V. Its 260 peak reflow temperature makes this regulator essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. This voltage regulator is included in the Switching Regulator or Controllers subcategory. As part of the MCP1602 series of regulators, the voltage regulators can be found. A voltage of 1.5V volts can be produced by voltage regulator. The switching regulator operation of the system is controlled by 8 pins. Adding the IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION feature improves this switching regulator's efficiency and stability.
MCP1602T-150I/MF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1602T-150I/MF Applications
There are a lot of Microchip Technology MCP1602T-150I/MF Voltage Regulators applications.
- Terrestrial set-top boxes
- Smart grid
- Electric heating, lighting
- Pipe bending machines
- Mobile phones
- Imported equipment
- seismic instrument power circuits
- Solar power plants
- Low output voltage switching power supply circuits
- Thermal power
