MCP1602T-250I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1602 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1602T-250I/MS Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. Throughout this voltage regulator, there are 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. For space-saving purposes, this voltage regulator is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs have been configured in the voltage regulator 12v. The adjusting voltage regulator generates Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. The switching frequency of this DC-DC switching regulator reaches 2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.7V. Featuring a 500mA output current, dc to dc voltage regulator offers maximum design flexibility. There is a voltage regulator maximum input voltage of 5.5V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. In this case, the DC/DC regulator belongs to the family MCP1602. There is a possibility that DC DC switching regulator can give voltage at 2.5V volts. 8 pins are used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 2.5V volts at all times. IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION-switching regulators provide efficiency and stability.
MCP1602T-250I/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1602T-250I/MS Applications
There are a lot of Microchip Technology MCP1602T-250I/MS Voltage Regulators applications.
- Production lines
- Experimental setup
- Household control circuits
- Overvoltage protection circuits in TV sets
- Textile machinery
- Shearing machines
- USB circuits
- Solar power plants
- Sink circuits
- Digital display device
