MCP1603-120I/MC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1603 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.2V |
| Output Type | Fixed |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.2V |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1603-120I/MC Overview
For optimal performance, this voltage regulator uses the Tube package. This harley voltage regulator has 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The space-saving 8-VFDFN Exposed Pad package is available for this voltage regulator. A total of 1 outputs are configured in this voltage regulator. The adjusting voltage regulator generates Fixed output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. A DC-DC switching regulator of this type operates at a switching frequency of 2MHz. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. DC DC switching regulator's maximum design flexibility comes from its output current of 500mA. There is a maximum input voltage of 5.5V for this voltage regulator 12v. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. This DC/DC regulator belongs to the MCP1603 family. The voltage DC DC switching regulator can produce is 1.2V volts. During switching regulator operation, 8 pins are used. Ideally this switch regulator should have an output voltage of about 1.2V at the very least. Switching regulators operate at 5.5V supply voltages. IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION-switching regulators provide efficiency and stability.
MCP1603-120I/MC Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1603-120I/MC Applications
There are a lot of Microchip Technology MCP1603-120I/MC Voltage Regulators applications.
- Laboratories
- Constant current circuits
- Surge protection circuits
- Correction machines
- Digital precision reference circuits
- Linear guide
- Emergency lighting monitoring equipment
- Post equipment
- Mobile phones
- Balance equipment
