MCP1603-150I/MC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1603 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1603-150I/MC Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. As you can see, this harley voltage regulator contains 8 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. In order to save space, this harley voltage regulator is available in the 8-VFDFN Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Surface Mount-mounting is compatible with this switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. The switching frequency of this DC-DC switching regulator reaches 2MHz. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. A maximum design flexibility is provided by the 500mA output current of voltage regulator. Voltage regulator's input voltage can reach 5.5V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. The MCP1603 family of DC/DC regulators includes this DC/DC regulator. The voltage DC DC switching regulator can provide is up to 1.5V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. Ideally this switch regulator should have an output voltage of about 1.5V at the very least. Switching regulators such as this operate from voltages of 5.5V. In addition to adding efficiency and stability to the harley voltage regulator, the IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION feature brings even greater benefits.
MCP1603-150I/MC Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1603-150I/MC Applications
There are a lot of Microchip Technology MCP1603-150I/MC Voltage Regulators applications.
- Linear guide
- Packaging
- Smoke exhaust equipment
- Pipe bending machines
- Hydrogen power
- PSRR circuits
- Driver circuits
- Telecommunications equipment
- Laboratories
- Electrical distribution systems
