MCP1603T-150I/OS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1603 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1603T-150I/OS Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, 5 terminations are present. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. The harley voltage regulator is available as a SOT-23-5 Thin, TSOT-23-5 package to save space. There are 1 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Fixed output. A Surface Mount mounting is required for this switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 2MHz. Regulator 2.7V can operate with dc to dc voltage regulator's minimum input voltage 2.7V. This voltage regulator 12v features maximum design flexibility thanks to its 500mA output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. There is a DC/DC regulator in this family that belongs to the MCP1603 family. The voltage DC DC switching regulator can provide is up to 1.5V volts. For switching regulator operation, 5 pins are used. There should be at least a 1.5V volt output voltage for this switching regulator in order to make it work properly. Switching regulators operate at 5.5V supply voltages. This harley voltage regulator is more efficient and stable due to its IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION feature.
MCP1603T-150I/OS Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
Operating supply voltage of 5.5V
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1603T-150I/OS Applications
There are a lot of Microchip Technology MCP1603T-150I/OS Voltage Regulators applications.
- Flaw detection equipment
- Sink circuits
- USB circuits
- Low output voltage switching power supply circuits
- Direct power supply system
- Hydro power
- Smoke prevention equipment
- Remotely powered electric motors
- Hydraulic presses
- Medical monitoring systems
