MCP1612-ADJI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1612 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP1612-ADJI/MF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. A voltage regulator consists of 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Space savings are achieved by placing this voltage regulator in the 8-VDFN Exposed Pad package. There are 1 outputs configured on this voltage regulator 12v. This DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 1.4MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. DC DC switching regulator's output voltage (Min/Fixed) amounts to 0.8V. There is a voltage regulator maximum input voltage of 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.3V. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. The MCP1612 family of DC/DC regulators includes this DC/DC regulator. Voltage of voltage regulator can be delivered at 5V volts. 8 pins are used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 800mV volts. Switching regulator has a maximum output current of 1A A, which is sufficient to meet the requirements of operation. A maximum voltage of 5V can be obtained from the regulator voltage.
MCP1612-ADJI/MF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1612-ADJI/MF Applications
There are a lot of Microchip Technology MCP1612-ADJI/MF Voltage Regulators applications.
- Scientific research
- Laboratories
- Emergency lighting monitoring equipment
- Television equipment
- Printing
- Grinders
- Adjustable voltage or current linear circuits
- Automatic plug-in machines
- Automation technology
- Lathes
