MCP1612T-ADJI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1612 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1612T-ADJI/MF Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. A voltage regulator consists of 8 terminations. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Space savings are achieved by placing this voltage regulator in the 8-VDFN Exposed Pad package. DC DC switching regulator is configured with 1 outputs. The adjusting voltage regulator generates Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. The switching frequency of this DC-DC switching regulator reaches 1.4MHz. Regulator 2.7V can operate with dc to dc voltage regulator's minimum input voltage 2.7V. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 0.8V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 3.3V. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. MCP1612 is a family of voltage regulators that belong to the DC/DC industry. A voltage of 5.5V volts can be produced by voltage regulator. There are 8 pins that are used for the operation of the voltage regulator 12v. For this switching regulator, we recommend keeping the output voltage at at least 800mV volts. A 1A A maximum output current is required to meet the switching regulator operation requirements. The maximum output voltage of 5V makes DC DC switching regulator easy to operate. There is a maximum output voltage of 5V from this voltage regulator 12v.
MCP1612T-ADJI/MF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MCP1612T-ADJI/MF Applications
There are a lot of Microchip Technology MCP1612T-ADJI/MF Voltage Regulators applications.
- Motor controller circuits
- Experimental setup
- seismic instrument power circuits
- Electrical distribution systems
- ATMs
- Game consoles
- Planers
- USB circuits
- Sensitive electronic devices
- Ball screw pair
