MCP1630T-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1630 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 11mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Max Supply Current | 4.5mA |
| Quiescent Current | 2.8mA |
| Input Voltage (Min) | 3V |
| Topology | Buck, Boost, Buck-Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 5.9ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 6.2 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 75 % |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1630T-E/MS Overview
With a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3V~5.5V. Worked in a -40°C~125°C TJ dc switcher before. The Surface Mount value makes it suitable for general dc dc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Search for "MCP1630" to find other relevant dc to dc converter ics. There are only 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3V. In most cases, the dc dc regulator's output current is 11mA. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 75 % duty cycle during power-ups and power-downs to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. 1MHz is the maximum frequency of this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. As long as the dc switching is in a dormant state, it utilizes 2.8mA. Components may be damaged if their current is greater than 4.5mA. 1MHz is the frequency at which this controller performs well most of the time.
MCP1630T-E/MS Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
Switching Frequency: 1MHz
MCP1630T-E/MS Applications
There are a lot of Microchip Technology MCP1630T-E/MS DC to DC converter applications.
- Handheld GPS
- Shearing machines
- Computer application technology
- Scientific testing
- Boring machines
- CMM
- Refrigerators of central air conditioners
- Computed tomography (CT)
- PSRR circuits
- Machining centers
