MCP1630VT-E/MC
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1630 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Voltage (Min) | 3V |
| Topology | Buck, Boost, Buck-Boost, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 5.9ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 6.2 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 75 % |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
MCP1630VT-E/MC Overview
In the 8-VFDFN Exposed Pad package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~5.5V. Worked in an dc switcher with a -40°C~125°C TJ rating. Surface Mount makes it suitable for general dc dc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. Search for "MCP1630" to find other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3V. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. Hence, CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. At 1MHz, this controller performs best.
MCP1630VT-E/MC Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE
Switching Frequency: 1MHz
MCP1630VT-E/MC Applications
There are a lot of Microchip Technology MCP1630VT-E/MC DC to DC converter applications.
- Wind power
- Computer application technology
- SMT equipment
- Pipe bending machines
- Refrigerators of central air conditioners
- Communication system
- Bending machines
- Experimental setup
- Post equipment
- Boring machines
