MCP1630VT-E/MS
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 2.8mA |
| Input Voltage (Min) | 3V |
| Topology | Buck, Boost, Buck-Boost, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 5.9ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 6.2 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Switching Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1630 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
MCP1630VT-E/MS Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 3V~5.5V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. A generalization of dc dc regulator can be made using Surface Mount. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. You can find other relevant dc to dc converter ics by searching "MCP1630". 8 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 3V. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 1MHz for this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE. Dormant dc switchings use 2.8mA. 1MHz is the frequency at which this controller can mostly perform fine.
MCP1630VT-E/MS Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
CAN ALSO BE CONFIGURED IN AVERAGE CURRENT MODE
Switching Frequency: 1MHz
MCP1630VT-E/MS Applications
There are a lot of Microchip Technology MCP1630VT-E/MS DC to DC converter applications.
- Motor controller circuits
- Lathes
- Fire elevators
- Alternators
- Planers
- Handheld GPS
- USB circuits
- CNC system
- PSRR circuits
- Textile machinery
