MCP16311T-E/MNY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP16311 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 15V |
| Output Type | Adjustable |
| Max Output Current | 800mA |
| Operating Supply Voltage | 30V |
| Voltage - Input (Min) | 4.4V |
| Input Voltage-Nom | 7V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1A |
| Max Output Voltage | 24V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2V |
| Max Duty Cycle | 94 % |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 800μm |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
MCP16311T-E/MNY Overview
For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. A voltage regulator consists of 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. There is a 8-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on the voltage regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 500kHz. The voltage regulator can be operated with a voltage as low as 4.4V as an input voltage. A maximum design flexibility is provided by the 1A output current of voltage regulator. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 7V is provided. As a member of the MCP16311 family of DC/DC regulators, this is a DC/DC regulator. At 15V volts, voltage regulator can provide voltage. In order to operate voltage regulator, 8 pins are required. Ideally this switch regulator should have an output voltage of about 2V at the very least. Accordingly, dc to dc voltage regulator's maximum output current is 800mA A. There is a maximum output voltage of 24V from this voltage regulator 12v. With 30V as the supply voltage, this DC-DC switching regulator will operate. In this case, a dc to dc voltage regulator's minimum supply voltage of 4.4V volts is required to ensure reliable performance. As long as the supply voltage is greater than 30V, the voltage regulator 12v will operate correctly.
MCP16311T-E/MNY Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 30V
MCP16311T-E/MNY Applications
There are a lot of Microchip Technology MCP16311T-E/MNY Voltage Regulators applications.
- Lathes
- Electric water heaters
- Special machining machine tools
- Grinders
- seismic instrument power circuits
- PSRR circuits
- Post equipment
- Adjustable voltage or current linear circuits
- Wide-range voltage regulation circuits
- Automatic testing equipment
