MCP1631HV-330E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631HV |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Max Supply Current | 2A |
| Control Features | Enable, Frequency Control, Ramp |
| Topology | Sepic |
| Control Mode | CURRENT-MODE |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Max Frequency | 2MHz |
| Max Duty Cycle | 10 % |
| Switching Frequency | 2MHz |
| Duty Cycle | 10 % |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1631HV-330E/SS Overview
In the 20-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tube solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 3.5V~16V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Ramp. Terminal (s) of the switching converters are designed at the DUAL position. 20 terminations with a variety of function. You can find other relevant dc to dc converter ics by searching "MCP1631HV". There are a total of 20 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 3.3V voltage. In most cases, the dc dc regulator's output current is 250mA. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 10 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 2MHz. Having a current greater than 2A may result in improper operation and possibly damage to the component. This controller performs best at a frequency of 2MHz.
MCP1631HV-330E/SS Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
Max Duty Cycle: 10 %
Switching Frequency: 2MHz
MCP1631HV-330E/SS Applications
There are a lot of Microchip Technology MCP1631HV-330E/SS DC to DC converter applications.
- PSRR circuits
- Automatic plug-in machines
- Electric heating, lighting
- Solar power plants
- Digital video recorders
- Arc suppression circuits
- Overvoltage protection circuits in TV sets
- Flaw detection equipment
- Remotely powered electric motors
- Energy management systems
