MCP1631HV-500E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631HV |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Max Supply Current | 2A |
| Control Features | Enable, Frequency Control, Ramp |
| Topology | Sepic |
| Control Mode | CURRENT-MODE |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Max Frequency | 2MHz |
| Max Duty Cycle | 10 % |
| Switching Frequency | 2MHz |
| Duty Cycle | 10 % |
| Height | 1.75mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1631HV-500E/SS Overview
Capsuled in the 20-SSOP (0.209, 5.30mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 3.5V~16V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Ramp. There are a DUAL terminal on the switching converters. A variety of 20 terminations are available in dc switching. In addition to "MCP1631HV", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 20 pins. Switching converter type is specifically Switching Regulator or Controllers. Statistically, the DC regulator outputs 5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 250mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 10 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator2MHz has the maximum frequency. Components may be damaged if their current is greater than 2A. When this switching controller is running at frequency 2MHz, it can perform well in most cases.
MCP1631HV-500E/SS Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
Max Duty Cycle: 10 %
Switching Frequency: 2MHz
MCP1631HV-500E/SS Applications
There are a lot of Microchip Technology MCP1631HV-500E/SS DC to DC converter applications.
- Scientific testing
- Bending machines
- Planers
- Handheld GPS
- Machining centers
- Computed tomography (CT)
- Various precision measuring detectors
- Product testing
- Grinders
- Computer-related products
