MCP1631T-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3.7mA |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Max Supply Current | 250mA |
| Control Features | Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 3V |
| Topology | Sepic |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 10 % |
| Switching Frequency | 2MHz |
| Duty Cycle | 0 % |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1631T-E/ML Overview
It comes in the 20-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). 3.5V~16V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Ramp. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . 20 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "MCP1631". The switching converter has a total of 20 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. DC regulator outputs 5V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 250mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 10 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 2MHz. It runs on a supply current of 3.7mA. In the presence of a current greater than 250mA, the component may fail to operate properly and may be damaged. 2MHz is the frequency at which this controller can mostly perform fine.
MCP1631T-E/ML Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 10 %
Switching Frequency: 2MHz
MCP1631T-E/ML Applications
There are a lot of Microchip Technology MCP1631T-E/ML DC to DC converter applications.
- Hydrogen power
- Planers
- Energy management systems
- Imported equipment
- Automation technology
- Automatic testing equipment
- Machining centers
- Printing
- Domestic water pumps
- Magnetohydrodynamic power
