MCP1631T-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Control Features | Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 3V |
| Topology | Sepic |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Switching Frequency | 2MHz |
| Duty Cycle | 10 % |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
MCP1631T-E/SS Overview
In the 20-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.5V~16V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Ramp is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. Various 20 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Searching "MCP1631" will return other relevant dc to dc converter ics. Switching converter has a total of 20 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3V. Voltages 5.5V are the maximum that the dc to dc regulator will accept. You should note that the dc dc regulator's usual output current is 250mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 2MHz on this dc regulators. 2MHz is the frequency at which this controller can mostly perform fine.
MCP1631T-E/SS Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Switching Frequency: 2MHz
MCP1631T-E/SS Applications
There are a lot of Microchip Technology MCP1631T-E/SS DC to DC converter applications.
- Shearing machines
- Game consoles
- Wind power
- SMT equipment
- Driver circuits
- Flaw detection equipment
- Direct power supply system
- Product burn-in
- Arc suppression circuits
- Constant current circuits
