MCP1631T-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Control Features | Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 3V |
| Topology | Sepic |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Switching Frequency | 2MHz |
| Duty Cycle | 0 % |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1631T-E/ST Overview
It comes in the 20-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.5V~16V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Ramp. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 20 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. Search for "MCP1631" to find other relevant dc to dc converter ics. The switching converter has a total of 20 pins. In particular, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3V. The dc to dc regulator can only accept a maximum input voltage of 5.5V. In most cases, the output current of the dc dc regulator will be 250mA, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. 2MHz is the maximum frequency of this dc regulators. 2MHz is the frequency at which this controller can mostly perform fine.
MCP1631T-E/ST Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Switching Frequency: 2MHz
MCP1631T-E/ST Applications
There are a lot of Microchip Technology MCP1631T-E/ST DC to DC converter applications.
- Plate bending machines
- Digital video recorders
- Wide-range voltage regulation circuits
- Smoke exhaust equipment
- Elevator lighting
- Computer rooms
- Access control systems
- Pipe bending machines
- Packaging
- Machining centers
