MCP1631V-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 3V |
| Topology | Sepic |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Switching Frequency | 2MHz |
| Duty Cycle | 0 % |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
MCP1631V-E/SS Overview
It comes in a 20-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). 3V~5.5V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Frequency Control, Ramp for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 20. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. You can find other relevant dc to dc converter ics by searching "MCP1631". There are a total of 20 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 3V. Voltages 5.5V are the maximum that the dc to dc regulator will accept. In most cases, the dc dc regulator's output current is 250mA. This information should be noted when you begin working with the component. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 2MHz. The frequency at which this controller performs well is 2MHz.
MCP1631V-E/SS Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Switching Frequency: 2MHz
MCP1631V-E/SS Applications
There are a lot of Microchip Technology MCP1631V-E/SS DC to DC converter applications.
- Sensitive electronic devices
- Household control circuits
- Smart grid
- Scientific testing
- Series voltage regulation circuits
- Surge protection circuits
- Computer application technology
- Plate bending machines
- Precision electronic equipment
- Alternators
