MCP1631VHV-330E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631VHV |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Control Features | Enable, Frequency Control, Ramp |
| Topology | Sepic |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Nominal Input Voltage | 16V |
| Max Duty Cycle | 10 % |
| Switching Frequency | 2MHz |
| Duty Cycle | 0 % |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP1631VHV-330E/ST Overview
With a 20-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 3.5V~16V volts and has 3.5V~16V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Ramp. Terminal (s) of the switching converters are designed at the DUAL position. Various 20 terminations. MCP1631VHV can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 20 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 3.3V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 250mA. The maximum duty cycle of this voltage regulator dc to dc is set to 10 % to ensure reliability during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. A frequency of 1MHz is set for the switching controller. You can set the input voltage to 16V for nominal working status. At 2MHz, this controller will mostly work as expected.
MCP1631VHV-330E/ST Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
Max Duty Cycle: 10 %
Frequency: 1MHz
Switching Frequency: 2MHz
MCP1631VHV-330E/ST Applications
There are a lot of Microchip Technology MCP1631VHV-330E/ST DC to DC converter applications.
- Serial communication converter
- Industrial robots
- Experimental setup
- Planers
- Power supplies of electronic gadgets
- Nuclear power plants
- Direct power supply system
- Cutting machine tools
- Ball screw pair
- Adjustable voltage or current linear circuits
