MCP1631VHV-500E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1631VHV |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~16V |
| Control Features | Enable, Frequency Control, Ramp |
| Topology | Sepic |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 2.5ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 2.7 ns |
| Nominal Input Voltage | 16V |
| Max Duty Cycle | 10 % |
| Switching Frequency | 2MHz |
| Duty Cycle | 0 % |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP1631VHV-500E/ST Overview
The switching controller fits in the 20-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 3.5V~16V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Ramp. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 20 of dc switching. MCP1631VHV can be searched for other relevant dc to dc converter ics. 20 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5V voltage. If you start a project, note down the dc dc regulator's usual output current of 250mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 10 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. It is possible to set the input voltage as 16V for nominal working statuses. This controller performs best at a frequency of 2MHz.
MCP1631VHV-500E/ST Features
Transistor Driver Outputs
Enable, Frequency Control, Ramp
Max Duty Cycle: 10 %
Frequency: 1MHz
Switching Frequency: 2MHz
MCP1631VHV-500E/ST Applications
There are a lot of Microchip Technology MCP1631VHV-500E/ST DC to DC converter applications.
- Linear guide
- Hydraulic presses
- Post equipment
- Plate bending machines
- Shearing machines
- Printing
- seismic instrument power circuits
- Digital precision reference circuits
- Fire elevators
- Program control systems
