MCP1632-AAE/MS
| Parameters | |
|---|---|
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 7.5mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE SOFT START |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1632 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
MCP1632-AAE/MS Overview
With a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 3V~5.5V. Qualified to work in a -40°C~125°C TJ dc switcher. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. You can find other relevant dc to dc converter ics by searching "MCP1632". 8 pins are on switching converter. 3V should be the minimum input voltage for the dc dc voltage regulator. Voltages 5.5V are the maximum that the dc to dc regulator will accept. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 300kHz is used by the switching controller. DC to DC voltage regulator has a value of ADJUSTABLE SOFT START to better satisfy the need. It is important that the controller is supplied with 7.5mA more than 7.5mA volts of current.
MCP1632-AAE/MS Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 300kHz
ADJUSTABLE SOFT START
MCP1632-AAE/MS Applications
There are a lot of Microchip Technology MCP1632-AAE/MS DC to DC converter applications.
- Product testing
- Computed tomography (CT)
- Direct power supply system
- seismic instrument power circuits
- Drilling machines
- Machining centers
- Overvoltage protection circuits in TV sets
- Various precision measuring instruments
- Scientific testing
- Telecommunications equipment
