MCP16321T-250E/NG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN (SN) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP16321 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Operating Supply Voltage | 24V |
| Voltage - Input (Min) | 6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1A |
| Output Configuration | Positive |
| Voltage - Output (Min/Fixed) | 2.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 99 % |
| Isolation | Isolated |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP16321T-250E/NG Overview
optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. A voltage regulator consists of 16 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. This harley voltage regulator is available in the 16-VFQFN Exposed Pad package for the purpose of space saving. In this case, DC DC switching regulator has 1 outputs configured to it. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. Surface Mount-mounting is compatible with this switching regulator. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. In this voltage regulator 12v, the switching frequency is 1MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 6V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.5V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 12V for the purposes of operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. DC/DC regulators such as this one belong to the MCP16321 family of products. The voltage DC DC switching regulator can provide is up to 2.5V volts. There are 16 pins used for switching regulator operation. A 1A A maximum output current is required to meet the switching regulator operation requirements. Switching regulators operate at 24V supply voltages. This harley voltage regulator is more efficient and stable due to its PFM CONTROL TECHNIQUE IS ALSO AVAILABLE feature. Powered by a 1A supply current, this DC-DC switching regulator works as a converter between DC and DC.
MCP16321T-250E/NG Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 24V
PFM CONTROL TECHNIQUE IS ALSO AVAILABLE
MCP16321T-250E/NG Applications
There are a lot of Microchip Technology MCP16321T-250E/NG Voltage Regulators applications.
- Mobile phones
- Electric heating, lighting
- Computer application technology
- Photovoltaic power
- Window air conditioners
- seismic instrument power circuits
- Alternators
- Product testing
- Imported equipment
- Overvoltage protection circuits in TV sets
