MCP16322T-180E/NG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN (SN) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP16322 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 2A |
| Operating Supply Voltage | 24V |
| Voltage - Input (Min) | 6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 2A |
| Output Configuration | Positive |
| Max Output Voltage | 1.8V |
| Voltage - Output (Min/Fixed) | 1.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 99 % |
| Isolation | Isolated |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP16322T-180E/NG Overview
A Cut Tape (CT) package is used in this voltage regulator to optimize performance. In this voltage regulator, 16 terminations are present. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the 16-VFQFN Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. There are output pins on this DC DC switching regulator that generate Fixed output. A Surface Mount mounting is required for this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. This voltage regulator 12v reaches a switching frequency of 1MHz. Voltage regulators like this one can operate at least with 6V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.8V. Its 260 peak reflow temperature makes this regulator essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 12V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. As a member of the MCP16322 family of DC/DC regulators, this is a DC/DC regulator. At 1.8V volts, voltage regulator can provide voltage. In order to operate voltage regulator, 16 pins are required. Voltage regulator's maximal output current reaches 2A A to meet the operation requirements. The maximum output voltage of this regulator voltage is 1.8V. This DC-DC switching regulator operates from a supply voltage of 24V. In addition to adding efficiency and stability to the harley voltage regulator, the PFM CONTROL TECHNIQUE IS ALSO AVAILABLE feature brings even greater benefits. The voltage regulator operates with a supply current of 2Amps.
MCP16322T-180E/NG Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 24V
PFM CONTROL TECHNIQUE IS ALSO AVAILABLE
MCP16322T-180E/NG Applications
There are a lot of Microchip Technology MCP16322T-180E/NG Voltage Regulators applications.
- Mobile phones
- Alternators
- Hydro power
- Low output voltage switching power supply circuits
- Photovoltaic power
- Digital video recorders
- Current source circuits
- Nuclear power plants
- Printing
- Radio equipment
