MCP1632T-AAE/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE SOFT START |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1632 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 7.5mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 85 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MCP1632T-AAE/MS Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. A 3V~5.5V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Switching can be done at 300kHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. Enable is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A search for "MCP1632" will reveal other relevant dc to dc converter ics. It is recommended to use 3V as the minimum input voltage of dc dc voltage regulator. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. voltage regulator dc to dcs with a 85 % duty cycle are designed to be reliable when powered on and powered off. DC to DC voltage regulator has a value of ADJUSTABLE SOFT START to better satisfy the need. Current supplied to the controller should not exceed 7.5mA.
MCP1632T-AAE/MS Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
ADJUSTABLE SOFT START
MCP1632T-AAE/MS Applications
There are a lot of Microchip Technology MCP1632T-AAE/MS DC to DC converter applications.
- Lathes
- Smoke prevention equipment
- Series voltage regulation circuits
- ATMs
- Shearing machines
- Adjustable voltage or current linear circuits
- Balance equipment
- SMT equipment
- Geothermal power
- Arc suppression circuits
