banner_page

MCP1642B-ADJI/MS

8 Terminals 0.65V 8-Pin MCP1642 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP1642B-ADJI/MS
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 364
  • Description: 8 Terminals 0.65V 8-Pin MCP1642 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2015
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP1642
Function Step-Up
Number of Outputs 1
Voltage - Input (Max) 5.5V
Output Voltage 1.8V
Output Type Adjustable
Max Output Current 800mA
Voltage - Input (Min) 0.65V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Max Output Voltage 5.5V
Topology Boost
Control Mode CURRENT-MODE
Frequency - Switching 1MHz
Control Technique PULSE WIDTH MODULATION
Synchronous Rectifier Yes
Min Output Voltage 1.8V
Height 950μm
Length 3mm
Width 3mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP1642B-ADJI/MS Overview


optimized performance is achieved by utilizing the Tube package in this voltage regulator. There are 8 terminations in this voltage regulator. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The voltage regulator 12v has 1 outputs. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Switching regulators like this one can be mounted on the Surface Mount mounting system. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator such as this one switches at 1MHz. The voltage regulator can be operated with a voltage as low as 0.65V as an input voltage. 5.5V volts is DC DC switching regulator's maximum input voltage. Its 260 peak reflow temperature makes this regulator essentially indestructible. The MCP1642 family of DC/DC regulators includes this DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at 1.8V volts. 8 pins are used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 1.8V volts at all times. The maximum output current reaches 800mA A to meet the switching regulator operation requirements. There is a maximum output voltage of 5.5V from this voltage regulator 12v.

MCP1642B-ADJI/MS Features


1 outputs
Peak reflow temperature (Cel) of 260
8 pins

MCP1642B-ADJI/MS Applications


There are a lot of Microchip Technology MCP1642B-ADJI/MS Voltage Regulators applications.

  • Electrical power transmission
  • Pipe bending machines
  • Experimental setup
  • Printing
  • Computer-related products
  • Network technology
  • Nuclear power plants
  • Computer rooms
  • Laboratories
  • Smoke prevention equipment

Write a review

Note: HTML is not translated!
    Bad           Good