MCP1650R-E/MS

8 Terminals 2.7V~5.5V 8-Pin MCP1650 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP1650R-E/MS
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 963
Description: 8 Terminals 2.7V~5.5V 8-Pin MCP1650 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Published	2004
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Frequency	750kHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP1650
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	100V
Output Type	Transistor Driver
Max Output Current	100mA
Input Voltage-Nom	3.3V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	120μA
Output Configuration	Positive
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	2.7V~5.5V
Control Features	Current Limit, Enable, Low Battery, Power Good
Max Output Voltage	100V
Topology	Boost, Flyback, SEPIC
Min Input Voltage	2V
Control Mode	CURRENT-MODE
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	3.3V
Switcher Configuration	SINGLE
Duty Cycle (Max)	80%
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP1650R-E/MS Overview

Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tube solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 2.7V~5.5V. Worked in an dc switcher with a -40°C~125°C TJ rating. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Low Battery, Power Good. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 3.3V. Other relevant dc to dc converter ics will be returned if you search "MCP1650". Switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 100V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is 750kHz frequency setting on the switching controller. In order to ensure the dc switcher's functionality, users must limit the voltage to 5.5V due to the dc switcher's maximum input voltage. A voltage of 2V is required for the supply. DC switcher will not be able to provide an output current above 100mA volts. Its datasheet indicates the switching converter can output a maximum of 100V volts. With a current supply of 120μA, it runs. Its lowest voltage output is not less than 3.3V.