MCP1650RT-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1650 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Current Limit, Enable, Low Battery, Power Good |
| Input Voltage (Min) | 2.7V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 80% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1650RT-E/MS Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 2.7V~5.5V volts and has 2.7V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 750kHz. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Low Battery, Power Good. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. You can find other relevant dc to dc converter ics by searching "MCP1650". 8 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.7V. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. This dc regulatorhas a max frequency of 850kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. The output of this function is the greatest value of 1A.
MCP1650RT-E/MS Features
Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
MCP1650RT-E/MS Applications
There are a lot of Microchip Technology MCP1650RT-E/MS DC to DC converter applications.
- seismic instrument power circuits
- Automatic plug-in machines
- Elevator lighting
- Direct power supply system
- CNC system
- Automation technology
- Gear/thread machining machines
- Various CNC machine tools
- Overvoltage protection circuits in TV sets
- Linear guide
