MCP1651R-E/MS

8 Terminals 2.7V~5.5V 8-Pin MCP1651 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP1651R-E/MS
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 505
Description: 8 Terminals 2.7V~5.5V 8-Pin MCP1651 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Published	2004
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Frequency	750kHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP1651
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	100V
Output Type	Transistor Driver
Max Output Current	100mA
Input Voltage-Nom	3.3V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	120μA
Nominal Supply Current	120μA
Output Configuration	Positive
Voltage - Supply (Vcc/Vdd)	2.7V~5.5V
Control Features	Current Limit, Enable, Low Battery, Power Good
Max Output Voltage	100V
Topology	Boost, Flyback, SEPIC
Min Input Voltage	2V
Control Mode	CURRENT-MODE
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	3.3V
Switcher Configuration	SINGLE
Max Duty Cycle	88 %
Duty Cycle (Max)	80%
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP1651R-E/MS Overview

It comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. A 2.7V~5.5V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Low Battery, Power Good. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. MCP1651 can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 100V voltage based on test statistics. It is set to 88 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 750kHz is the frequency of the switching controller. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. In order to use a 2V voltage supply, switching controller is necessary to have one. An output current greater than 100mA cannot be provided by the dc switcher. The datasheet indicates that the switching converter can output 100V volts at its maximum. A current of 120μA is supplied to it. A voltage controller's lowest output voltage cannot be less than 3.3V. This the controllers dc has a nominal current supply of 120μA.