MCP1651S-E/MS

8 Terminals 2.7V~5.5V 8-Pin MCP1651 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 750kHz Transistor Driver

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP1651S-E/MS
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 977
Description: 8 Terminals 2.7V~5.5V 8-Pin MCP1651 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 750kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Published	2004
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP1651
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	100V
Output Type	Transistor Driver
Max Output Current	100mA
Input Voltage-Nom	3.3V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	120μA
Nominal Supply Current	120μA
Output Configuration	Positive
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	2.7V~5.5V
Control Features	Current Limit, Enable, Low Battery, Power Good
Max Output Voltage	12V
Topology	Boost, Flyback, SEPIC
Min Input Voltage	2V
Control Mode	CURRENT-MODE
Frequency - Switching	750kHz
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	3.3V
Switcher Configuration	SINGLE
Max Frequency	850kHz
Max Duty Cycle	88 %
Duty Cycle (Max)	80%
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP1651S-E/MS Overview

Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). A 2.7V~5.5V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at 750kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Low Battery, Power Good is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. Searching "MCP1651" will return other relevant dc to dc converter ics. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 100V volts. You should note down the dc dc regulator's usual output current of 100mA when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 88 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 850kHz. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. A voltage of 2V must be present in the supply. A dc switcher can only produce an output current of 100mA. Datasheets indicate that the switching converter can output 12V volts at its maximum. A current of 120μA is supplied to it. 3.3V voltage output is lower than 3.3V. This the controllers dc receives a 120μA nominal current supply.