MCP1652R-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1652 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Output Current | 100mA |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 120μA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Current Limit, Enable, Low Battery, Power Good |
| Max Output Voltage | 100V |
| Topology | Boost, Flyback, SEPIC |
| Min Input Voltage | 2V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 3.3V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 80% |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1652R-E/MS Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. 2.7V~5.5V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Low Battery, Power Good. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 3.3V. Search for "MCP1652" to find other relevant dc to dc converter ics. Pins number 8 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 12V. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is 750kHz frequency setting on the switching controller. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. The supply voltage must be 2V. There will be 100mA current output from the dc switcher above 100mA. Its datasheet indicates the switching converter can output a maximum of 100V volts. A supply current of 120μA is used to power it. The voltage controller's lowest voltage output is not less than 3.3V.
MCP1652R-E/MS Features
Transistor Driver Outputs
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
Frequency: 750kHz
MCP1652R-E/MS Applications
There are a lot of Microchip Technology MCP1652R-E/MS DC to DC converter applications.
- CMM
- Scientific testing
- Geothermal power
- Various precision measuring instruments
- Shearing machines
- PSRR circuits
- Sink circuits
- Printing equipment
- Driver circuits
- Scientific research
