MCP1653ST-E/UN
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1653 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Output Current | 100mA |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| Control Features | Current Limit, Enable, Low Battery, Power Good |
| Input Voltage (Min) | 2.7V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 80% |
| Height | 850μm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
MCP1653ST-E/UN Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 2.7V~5.5V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 750kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Current Limit, Enable, Low Battery, Power Good is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . Various 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. Other relevant dc to dc converter ics will be returned if you search "MCP1653". Total pins of switching converter are 10. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 2.7V. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 850kHz on this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V. DC switcher will not be able to provide an output current above 100mA volts.
MCP1653ST-E/UN Features
Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
MCP1653ST-E/UN Applications
There are a lot of Microchip Technology MCP1653ST-E/UN DC to DC converter applications.
- CMM
- ATMs
- Planers
- Hydraulic presses
- Computer monitoring equipment of building
- Electrical power transmission
- Milling machines
- Automatic plug-in machines
- Production lines
- Digital video recorders
