MCP1662T-E/MNY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1662 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Max Supply Voltage | 5.5V |
| Output Current | 200mA |
| Max Supply Current | 1.3A |
| Voltage - Output | 32V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 200mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 6 |
| Voltage - Supply (Min) | 2.4V |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
MCP1662T-E/MNY Overview
Its 8-WFDFN Exposed Pad package is used to save board space. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.It is highly performing and reliable when it emerges as a DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.Backlight, Camera Flash has many benefits.In the 500kHz frequency range, it operates.In this case, the terminations are set to 8.It is configured with 8 pins as its base.Under 2.4V voltage supply, undetermined failures may occur.The number of segments is estimated to be 6.The mount is in the way of Surface Mount.It is under the base part number MCP1662 that the LED driver can be found.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.There is 32V voltage output from the device.According to its characteristics, it is also classified into Display Drivers.As long as the supply current is less than 1.3A, this device can provide high efficiency.There is no current that can be supplied to the load.
MCP1662T-E/MNY Features
Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 500kHz
Supply voltage of 3.3V
MCP1662T-E/MNY Applications
There are a lot of Microchip Technology MCP1662T-E/MNY LED Driver ICs applications.
- High-end retail lighting
- Other Electronic Devices
- Stage and Studio lighting
- Amusement Machines
- Down lights
- LED Lightings for Industrial Equipment
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- Flicker-free LED Lighting using R1580N
- LED Lighting PFCs, Linear Dimmable
