MCP19035-AAAAE/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP19035 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Phase Control, Power Good |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Max Duty Cycle | 85 % |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP19035-AAAAE/MF Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4.5V~30V volts and has 4.5V~30V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Phase Control, Power Good. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 10 terminations. MCP19035 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 5V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 85 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at a frequency of 300kHz. It runs on a supply current of 6mA. The phase of this controller is 1.
MCP19035-AAAAE/MF Features
Transistor Driver Outputs
Enable, Phase Control, Power Good
Max Duty Cycle: 85 %
Frequency: 300kHz
MCP19035-AAAAE/MF Applications
There are a lot of Microchip Technology MCP19035-AAAAE/MF DC to DC converter applications.
- Geothermal power
- Magnetohydrodynamic power
- Flexible manufacturing cells
- Computer rooms
- Smart grid
- Access control systems
- Scientific testing
- Window air conditioners
- Automation technology
- Nuclear power plants
