MCP19114-E/MJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 928.191737mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP19114 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 31.25kHz~2MHz |
| Reference Voltage | 1.23V |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Nominal Input Voltage | 12V |
| Isolation | Isolated |
| Serial Interfaces | I2C |
| Height | 850μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP19114-E/MJ Overview
With a 24-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~42V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 31.25kHz~2MHz. A generalization of dc dc regulator can be made using Surface Mount. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . The 24 terminations can be used for a wide range of dc switching. You can find other relevant dc to dc converter ics by searching "MCP19114". Pins number 24 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The switching controller works at a frequency of 2MHz. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. A nominal working status is achieved when the input voltage is set to 12V.
MCP19114-E/MJ Features
Transistor Driver Outputs
Switching Frequency: 31.25kHz~2MHz
Frequency: 2MHz
MCP19114-E/MJ Applications
There are a lot of Microchip Technology MCP19114-E/MJ DC to DC converter applications.
- Ball screw pair
- Production lines
- Computed tomography (CT)
- Digital display device
- Arc suppression circuits
- Hydro power
- Computer rooms
- Power supplies of electronic gadgets
- Textile machinery
- Automatic plug-in machines
