MCP19116-E/MJ
| Parameters | |
|---|---|
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 5 VOLT REGULATING OUTPUT ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19116 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 41V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Control Features | EN |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Frequency - Switching | 31.25kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 44V |
| Serial Interfaces | I2C |
| Clock Sync | Yes |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
MCP19116-E/MJ Overview
It comes in the 24-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~42V. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 31.25kHz~2MHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features EN. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . An array of 24 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "MCP19116". 24 pins are present on switching converter. Test statistics indicate DC regulator outputs 41V voltage. In most cases, the output current of the dc dc regulator will be 50mA, so note that when you start the project. A frequency of 2MHz is used by the switching controller. This value is 5 VOLT REGULATING OUTPUT ALSO AVAILABLE so that DC to DC voltage regulator better serves the purpose. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. A nominal working status is achieved when the input voltage is set to 44V.
MCP19116-E/MJ Features
Transistor Driver Outputs
Switching Frequency: 31.25kHz~2MHz
EN
PULSE WIDTH MODULATION
Frequency: 2MHz
5 VOLT REGULATING OUTPUT ALSO AVAILABLE
MCP19116-E/MJ Applications
There are a lot of Microchip Technology MCP19116-E/MJ DC to DC converter applications.
- Computed tomography (CT)
- Imported equipment
- CNC system
- Large fire protection systems
- Driver circuits
- Hydro power
- Computer application technology
- Drilling machines
- Printing
- Various precision measuring instruments
