MCP19117-E/MQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2018 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 5 VOLT REGULATING OUTPUT ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | MCP19117 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Control Features | EN |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Cuk, Flyback, SEPIC |
| Frequency - Switching | 31.25kHz~2MHz |
| Input Voltage (Max) | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Serial Interfaces | I2C |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP19117-E/MQ Overview
This switching controller fits most application requirements since it is packaged in a 28-VFQFN Exposed Pad package. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~42V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Switching can be done at 31.25kHz~2MHz with this switching controller. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's EN. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at QUAD. The 28 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "MCP19117". Total pins of switching converter are 28. This dc dc voltage regulator should be powered by a voltage of 4.5V. This dc to dc regulator accepts only 42V input voltage at most. In most cases, the dc dc regulator's output current is 50mA. This information should be noted when you begin working with the component. Switching controller operates at a frequency of 2MHz. DC to DC voltage regulator has a value of 5 VOLT REGULATING OUTPUT ALSO AVAILABLE to better satisfy the need. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series.
MCP19117-E/MQ Features
Transistor Driver Outputs
Switching Frequency: 31.25kHz~2MHz
EN
PULSE WIDTH MODULATION
Frequency: 2MHz
5 VOLT REGULATING OUTPUT ALSO AVAILABLE
MCP19117-E/MQ Applications
There are a lot of Microchip Technology MCP19117-E/MQ DC to DC converter applications.
- Alternators
- Game consoles
- Power supplies of electronic gadgets
- Wide-range voltage regulation circuits
- Arc suppression circuits
- Production lines
- Telecommunications equipment
- Lathes
- Large fire protection systems
- Digital video recorders
