MCP19118T-E/MJ
| Parameters | |
|---|---|
| Operating Supply Voltage | 40V |
| Interface | I2C, SMBus |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Control Features | Phase Control |
| Topology | Buck |
| Frequency - Switching | 100kHz~1.6MHz |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 98.75 % |
| Serial Interfaces | I2C, PMBus, SMBus |
| Clock Sync | No |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP19118 |
| JESD-30 Code | S-PQCC-N24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.6V |
| Output Type | Transistor Driver |
MCP19118T-E/MJ Overview
Capsuled in the 24-VFQFN Exposed Pad package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~40V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~125°C TJ. It can switch at 100kHz~1.6MHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Phase Control. Switching converters are designed with the terminal (s) at position QUAD . 24 terminations with various dc switching's functions. You can find other relevant dc to dc converter ics by searching "MCP19118". As determined by the test statistics, the output voltage of DC regulator is 3.6V. The dc dc regulator's usual output current is 2A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 98.75 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. To run the voltage regulator dc to dc safely and reliably, users should apply 40V to the voltage regulator dc to dc. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series. The supply voltage must be 12V.
MCP19118T-E/MJ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.6MHz
Phase Control
Max Duty Cycle: 98.75 %
MCP19118T-E/MJ Applications
There are a lot of Microchip Technology MCP19118T-E/MJ DC to DC converter applications.
- Gear/thread machining machines
- Printing equipment
- Low output voltage switching power supply circuits
- Game consoles
- Photovoltaic power
- Series voltage regulation circuits
- Adjustable voltage or current linear circuits
- Product burn-in
- CNC system
- Grinders
